Pimp Your Credit Card!
Credit cards look stupid, but you can trick yours out with a DIY design using this guide and these materials:
According to the guide-makers and this video, (warning: boobie), it'll still work in machines.
Pimp My Card [Zug] (Thanks to neosavant!)
Post a comment
Comments:
@Jaysyn: I think the orig. Credit card look stupid stupid was actually funnier...but then again I am off kilter for the most part..
@rublind: It's magnetic, so I assume that so long as the layer of paint isn't really thick or metallic, it should be fine.
@TVarmy: My concern is that the mechanism that slides the card in and out might not work properly because it can't grip part of the card or something.
this isnt the greatest idea. i used to work at sears and they now instruct all the cashiers to view each credit or debit card under the ultraviolet light thats by the registers. the revamping of the cards may cover up the markings that card companies place and what caashiers are instucted to look for, therefore not accepting your card.
@rublind: The directions specifically tell you to cover the magnetic strip with masking tape.
What I can't figure out is how he got such a clean cut around the numbers and his name.
Possibly the coolest thing I have ever seen. I'm going to pimp out my mom's cards with some really crazy images so she'll have a shocker next time she reaches for one in a store. :D I'm thinking something that says "Aging homemaker with a passion for guns, liquor, and dangerous men." ;) (She's really a sweet, gentle little old lady). :D
Zug is one of my favorite sites, and some of the pranks are excellent. (The fake credit card signature prank is classic.)
But a word of warning. The application of the thin layer of plastic may cause some small problems.
Although they are less common these days, some stores still use card imprinters, especially if the mag-stripe has been compromised. The additional layer may reduce the ability of the imprinter to print the numbers clearly.
This is not the end-of-the-world. If the numbers are legible the clerk can hand-print or enter the number into the computer, but it may slow down the transaction and make for a less pleasant transaction.
That being said, often a card that has been used a lot will no longer register in a card reader. This is due to the mag-stripe being badly worn, the card having come in contact with a magnet, or, most often, the plastic of the card having become compressed in the users wallet (this happens a lot to guys with overstuffed wallets).
In this last instance, the card becomes so thin that it does not activate the card reader. A quick fix that some clerks use is to wrap a thin plastic bag around the card to increase its thickness.
So the mod suggested might resurrect one of these thin cards.
@jcarrnelson: For some reason I think that is the last thing in the world to worry about. Considering I've had "see id" on the back of every credit card I've ever had and 99.999% of the time they don't even get that far I can't realistically see any cashier really being bothered to check it under a different light.
Not to mention the fact that when I was at sears it took us almost 5 straight months of nagging to make the cashiers realize the counterfet detection pens weren't just there for people to write out checks with.
Zug has a whole series on how he signed his cards.











"Credit card look stupid stupid.."??